The versatility of Pneumatic excessive strain grouting pumps

Peumatic Grouting pump is designed for pressure and filling grouting of cement and bentonite slurries. It is primarily used for injecting (grouting) bar anchors and the drill holes to find a way to reinforce the loose rock mass. The most grain dimension cannot exceed zero.2 mm.
Grouting pump operation and maintenance is straightforward, secure and dependable. This pump is used in mines working underneath difficult situations as a result of it’s reliable and explosion-proof.
Basic Pneumatic Grouting pump embrace: An air inlet, the pneumatic cylinder, mounting base frame and stand, pressure gauge, pumping cylinder, outlet with quick launch coupling and wheels.
How it works
Pneumatic stress in the air cylinder exerts a high pressure on the grout mixture which ends up in ejection of grout with a excessive pressure and velocity. The valves of the air cylinder in the pump perform automatically to actuate the cylinder. The pneumatic cylinder then moves the plunger up and down to complete the pumping cycle.
เกจวัดแรงดันสูญญากาศ may be driven even without Electrical energy provide in distant areas through the use of engine pushed compressor.
Applications
The pump is majorly utilized in development and mining trade for injecting materials into wide and medium size gap in beams, columns ,basement partitions and flooring, lift shaft concrete wall fill-up and so forth. In mining industry it’s used to refill cement answer where there’s a gap exists between construction and rock and for soil stabilization.
Detachable design tends to easy upkeep and transportation. Challenging works like Grouting in Bridges.
READ: How hydraulic submersible pumps work
This pump is extensively used in tunnels, coal mine, bridges and dams, building foundation, and different underground tasks, and inflammable, explosive sites and different unhealthy surroundings.
It has utility in chemical trade also to pump out chemical slurries.
The pump is electricity free so, can be used at any website situation whether or not it is rural or urban.
Mining Pneumatic Grouting pump has a bigger discharge slurry adjustment range. Generally the final amount of the grouting quantity is 8 or10 times of the quantity in the beginning. And the ultimate grouting quantity proves that filling is compacted.
Simply put; Pneumatic high-pressure grouting pump is specifically designed for high-pressure grouting. And it adopts full hydraulic drive, it’s strain and flow could be adjusted according to the necessities of grouting,(The flow of grouting pump is 0-100L/min, stress of discharge is 0-10MPa).in addition to, This Pneumatic high-pressure grouting pump can be utilized for grouting single or double fluid.
High-pressure grouting pump is mainly used for highways, railways, water and electricity, building, mining and so on. ground/underground construction.
Benefits
Mining Pneumatic Grouting pump has the advantages of low energy consumption, small vibration, low noise, small size, excessive effectivity, dependable performance, strain and circulate control, long life and so on. Common mine grouting pump has pneumatic injection pump, dual fluid injection pump, extrusion injection pump and piston injection pump.
Pneumatic grout pump can additionally be Light weight and with a wheelie design it may be carried easily. It is designed for simple operation and low maintenance. Last however not least its spare elements are easily obtainable.
Share

Scroll to Top