Very tall buildings have unique fireplace safety design points that are not experienced in different forms of constructions. For instance, as a result of the peak of the construction is past the reach of ladders, tall buildings are equipped with extra fireplace safety options as it’s not attainable for the hearth department to provoke exterior rescues from ladders and suppress fires with exterior hose streams.
In regards to fire safety, the performance historical past of very tall buildings whereas very successful, has not been without catastrophic incidents. Many of these incidents have resulted in 1) quite a few deaths and injuries, 2) extreme property loss and 3) disruptions in enterprise continuity. For instance, the One Meridian Plaza high-rise fireplace in Philadelphia that occurred in 1991 resulted within the loss of three firefighters and building by no means being re-opened. In 1988, the fireplace in the Interstate Bank Building in Los Angeles skilled one fatality and resulted in the building being out of use for six months.
Based on analysis and lessons realized, the mannequin constructing codes have made significant progress in addressing fireplace questions of safety in very tall buildings. At the identical time, the complexity and unique challenges of today’s very tall buildings have created an surroundings where complete performance-based solutions have turn out to be a necessity.
To help the design group with growing performance-based fire safety options for very tall buildings, in 2013, the Society of Fire Protection Engineers (SFPE) partnered with the International Code Council (ICC) to develop the Engineering Guide: Fire Safety in Very Tall Buildings.1 This publication is written as a guide to be used in conjunction with local codes and standards and serves as an added software to these concerned in the fire safety design of unique tall buildings. The information focuses on design points that affect the hearth safety performance of tall buildings and the way engineers can incorporate performance-based hearth protection via hazard and danger analysis methodologies into the design of tall buildings. This article will talk about a few of the distinctive fireplace safety design strategies/methodologies employed within the design of tall buildings that are referenced in the ICC/SFPE Guide.
Emergency Egress

Developing an efficient evacuation technique for a tall building is challenging because the time to complete a full constructing evacuation increases with building height. At the same time, above certain heights, the traditional methodology of requiring all occupants to simultaneous evacuate is most likely not practical as occupants turn into more susceptible to additional dangers when evacuating by way of stairways. That is why tall buildings usually make use of non-traditional or alternative evacuation methods.
When designing an egress plan for a tall building, the first objective should be to provide an appropriate means to allow occupants to move to a place of security. To accomplish this aim, there are a quantity of evacuation methodologies which are obtainable to the design team. These evacuation methods can embody however aren’t restricted to 1) defend-in-place, 2) shifting people to areas of refuge and 3) phased/progressive evacuation. It can be attainable that a mixture of those methods can be this greatest solution. When deciding on an applicable strategy, the design group should consider the required stage of security for the constructing occupants and the constructing performance objectives which are recognized by the building’s stakeholders.
Using protected elevators has become another evacuation strategy that is turning into extra prevalent within the design of tall buildings. In addition to helping the fire division with operations and rescues, protected elevators are now getting used for constructing evacuation, significantly for occupants with disabilities. When contemplating elevators in an evacuation technique, there are a variety of design issues to think about: 1) safety and reliability of the elevators, 2) coordination of elevator controls and building safety techniques, 3) schooling of constructing occupants and first responders and 4) communication to constructing occupants in the course of the emergency.
Tall buildings often make use of non-traditional or different evacuation methods.
Fire Resistance

The penalties of partial or international collapse of tall buildings as a outcome of a severe fire pose a significant danger to a lot of folks, the hearth service and surrounding buildings. At the same time, tall buildings typically have distinctive design features whose position within the structure and fireplace response usually are not simply understood utilizing conventional fire protection strategies. These distinctive elements could warrant a have to undertake a sophisticated structural fire engineering evaluation to demonstrate that the building’s efficiency goals are met.
Performance-based design of structural hearth resistance entails three steps: (1) willpower of the thermal boundary situations to a construction ensuing from a fireplace; (2) calculation of the thermal response of the structure to the fire exposure, and (3) willpower of the structural response of the structure. Guidance on performing this sort of analysis can be found within the SFPE Engineering Standard on Calculating Fire Exposures to Structures2, and SFPE Engineering Standard on Calculation Methods to Predict the Thermal Performance of Structural and Fire Resistive Assemblies.3

Water-Based Fire Suppression Systems

In tall buildings, the water provide required for hearth protection systems could be larger than the capability of the general public water supply. As such, fire safety system water supplies for sprinkler techniques and standpipes require the utilization of pumps and/or gravity water tanks to boost the water pressure. Reliability of this water provide is a key consideration. As such, redundant fireplace pumps, gravity-based storage provides, or both may be wanted to boost system reliability.
Another problem to consider when designing water-based hearth suppression techniques is stress management as it is possible for system components to be exposed to pressures that exceed its most working pressure. Consequently, it might be essential to design vertical strain zones to regulate pressures in the zone. Additionally, pressure regulating valves are often wanted. When put in, care have to be taken to guarantee that these pressure regulating valves are installed properly and adequately maintained.
Fire Alarm and Communication Systems

Providing constructing occupants with accurate information during emergencies increases their capacity to make acceptable selections about their very own security. Fire alarm and communication techniques are an necessary source of this data. Very tall buildings make use of voice communication methods which are built-in into the fireplace alarm system. When designing voice communication systems it is important to be certain that the system provides reliable and credible info.
Fire alarm system survivability is another import issue to suppose about in hearth alarm system design. For tall buildings, consideration should be given so that an assault by a hearth in an evacuation zone does not impair the voice messaging outdoors the zone. Some of the design issues to attain survivability might include: 1) protection of management gear from fire, 2) protection of circuits. 3) configuration of circuits and 4) shielding of panels.
Tall buildings usually employ smoke management methods that both vent, exhaust or restrict the spread of smoke.
Smoke Control

Controlling the unfold of smoke is more sophisticated in tall buildings. For instance, tall buildings experience a phenomenon referred to as stack effect. Stack effect happens when a tall constructing experiences a pressure difference all through its peak on account of temperature differentials between the outside air temperature and the inside building temperature. This causes air to move vertically, depending on the surface air temperature – both upward or downward in a building. It can also cause smoke from a constructing fire to spread throughout the constructing if not controlled. That is why tall buildings usually make use of smoke administration systems that both vent, exhaust or limit the spread of smoke.
Other concerns in tall buildings included the air motion created by the piston effect of elevators and the effects of wind. Air movement attributable to elevator automobiles ascending and descending in a shaft and the consequences of wind may find yourself in smoke movement in tall buildings. These impacts turn into extra pronounced as the peak of the constructing improve.
Because very tall buildings complicate smoke unfold, efficient smoke management is harder to attain. The potential options are numerous and include a combination of energetic and passive options corresponding to but not limited to: 1) smoke barrier partitions and floors, 2) stairway pressurization systems, 3) pressurized zoned smoke control supplied by the air-handling gear, and 4) smoke dampers. The answer implemented into the design needs to address the constructing itself, its uses, relevant occupant traits and reliability.
First Service Issues

It goes without saying that tall buildings current unique challenges to the hearth service. During the planning and design phases, it’s important for the design staff to work with the hearth service to debate the type of sources which would possibly be needed for an incident and the actions that might be wanted to mitigate an incident. This includes growing building and post-construction preplans. เพรสเชอร์เกจ ought to include and never be limited to making provisions for 1) fireplace service entry including transport to the very best degree of the constructing, 2) establishing a water provide, 3) standpipe methods (temporary and permanent), 4) communication systems, and 5) understanding the operations of the hearth protection systems in the constructing.
One of the challenges the fireplace service faces throughout incidents in tall buildings is the power of firefighters to move gear to the incident location. Designers should keep in mind how the hearth service can transport its equipment from the response degree to the very best stage in a safe method.
Additionally, care needs to be taken when designing the hearth command heart as it’s going to provide the fireplace service command workers with essential information about the incident. The fireplace command heart must be accessible and will embody 1) controls for constructing methods, 2) contact information for building management, 3) current buildings plans, 4) emergency response and egress plans and 5) preplans.
1 International Code Council/SFPE. (2013). Engineering Guide: Fire Safety for Very Tall Buildings. Country Club Hills, IL.
2 SFPE. (2011). SFPE Standard S.01 2011, Engineering Standards on Calculating Fire Exposures to Structures. Gaithersburg, Maryland.
three SFPE. 2015). SFPE Standard S.02 2015, SFPE Engineering Standard on Calculation Methods to Predict the Thermal Performance of Structural and Fire Resistive Assemblies. Gaithersburg, Maryland.
Share